Monster Power HTFS500 POWERCENTER - Manual (Page 19)

HTFS 500 PowerCenter HTFS 1000 PowerCenter
!#$#
^6
M!
2%3%4
/&&
!#$#
^6
M!
14
HOOK-UP GUIDE
Remote “AC/DC In” Control Hook-Up
This feature connects your PowerCenter to an automated Home Theater control system or allows another component
with a Remote “DC Out” connection to automatically turn on and off your PowerCenter.
A) Plug the AC power cable of the component you are using to control the PowerCenter into an unswitched outlet
on the PowerCenter. Note: This component must deliver a control voltage between 3-30 volts DC.
B) Plug one end of the 1/8" miniplug (supplied) into the corresponding Remote “AC/DC In” connection
on the PowerCenter.
C) Plug the other end of the 1/8" miniplug into the Remote “DC Out” connection on the component
that you want to turn on and off the PowerCenter’s Switched Outlets when it is turned on.
Remote
Trigger
Remote
Trigger