Monster Power HTFS500 POWERCENTER - Manual (Page 14)

9
10. Remote “AC/DC In” Control: Allows you to automatically turn on/off the PowerCenter’s switched outlet(s)
via the Remote “AC/DC Out” on another component (such as an A/V receiver or custom installation equipment).
Note 1: To use this feature, the ON/OFF button on HTFS1000 or the RESET/OFF switch on HTFS500 should be set to OFF.
Note 2: The voltage range of the external source’s output for remote control should be 3~30V (AC or DC).
11. Resettable 15 Amp Circuit Breaker (HTFS1000 only): Protects the PowerCenter from continuous
power overload.
12. AC Outlets: These outlets have special filter circuitry specially designed to eliminate noise
from the AC power line to high definition components.
13. Display Unit (HTFS1000 only): Provides system status indicators and displays either the input voltage
or current usage of your system. It is detachable from the main unit.
14. Main Unit (HTFS1000 only): Main unit of the PowerCenter. It provides power to the display unit
via a 4-wire RJ11 phone cable.