Seating and safety restraints – Mazda 2008 Tribute HEV User Manual

Page 146

Advertising
background image

If you install a child seat with rigid LATCH attachments, do not tighten
the tether strap enough to lift the child seat off the vehicle seat cushion
when the child is seated in it. Keep the tether strap just snug without
lifting the front of the child seat. Keeping the child seat just touching the
vehicle seat gives the best protection in a severe crash.

Each time you use the safety seat, check that the seat is properly
attached to the lower anchors and tether anchor. Try to tilt the child
seat from side to side. Also try to tug the seat forward. Check to see if
the anchors hold the seat in place.

WARNING: If the safety seat is not anchored properly, the risk
of a child being injured in a crash greatly increases.

2008 Tribute Hybrid (thv)
Owners Guide (post-2002-fmt)
USA
(fus)

Seating and Safety Restraints

146

Advertising