Language, System warnings/information, Driver controls – Mazda 2008 Tribute HEV User Manual

Page 79

Advertising
background image

Language

1. Select this function from the

SETUP menu for the current
language to be displayed.

2. Waiting 4 seconds or pressing

the RESET control cycles the
message center through each of the language choices.

Selectable languages are English, Spanish, or French.

3. Press and hold the RESET control for 2 seconds to set the language

choice.

System warnings/information

System warnings alert you to possible problems or malfunctions in your
vehicle’s operating systems.

In the event of a multiple warning situation, the message center will
cycle the display to show all warnings by displaying each one for four
seconds.

The message center will display the last selected feature if there are no
more warning messages. This allows you to use the full functionality of
the message center after you acknowledge the warning by pressing the
RESET control and clearing the warning message.

Warning messages that have been reset are divided into two categories:
• They will reappear on the display ten minutes from the reset.
• They will not reappear until an ignition LOCK-RUN cycle has been

completed if the fault condition still exists.

This acts as a reminder that these warning conditions still exist within
the vehicle.

Warnings

Status

Driver door ajar

Warning cannot be reset

Passenger door ajar

Rear left door ajar

Rear right door ajar

2008 Tribute Hybrid (thv)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

79

Advertising