Autolamp delay system (if equipped), Foglamp control (if equipped), Lights – Mazda 2008 Tribute HEV User Manual

Page 48

Advertising
background image

Autolamp delay system (if equipped)

If your vehicle is equipped with autolamps, you can set the delay time to
keep the headlights on for up to three minutes after the key is turned
OFF. The delay time is set to 20 seconds at the factory, but the delay
time may be changed by following the steps below (Steps 1 through 6
must be done within 10 seconds):

1. Turn the key to the 1 (LOCK)

position.

2. Rotate the headlamp control to

the autolamp position.

3. Rotate the headlamp control to

the OFF position.

4. Turn the key to the 3 (RUN)

position.

5. Turn the key back to the 1

(LOCK) position.

6. Turn the headlamp control to the autolamp position (the headlights

should turn on).

7. Turn the headlamp control to the OFF position when the desired

delay time (up to 3 minutes) has been reached.

Foglamp control (if equipped)

The headlamp control also operates
the foglamps. The foglamps can be
turned on when the headlamp

control is in the

,

or

positions and the high beams are
not turned on.

Pull headlamp control towards you
to turn foglamps on. The foglamp
indicator light

will illuminate.

2008 Tribute Hybrid (thv)
Owners Guide (post-2002-fmt)
USA
(fus)

Lights

48

Advertising