McIntosh MVP851 - Manual (Page 16)

16
How to Operate the Setup Mode
Your McIntosh MVP851 has been factory configured for
default operating settings that will allow you to immedi-
ately enjoy superb video and high fidelity audio from a
DVD-Video. It also reproduces DVD-Audio and CDs with
unparalleled sonic purity. If you wish to make changes to
the factory default settings, a Setup feature is provided to
customize the operating settings using On Screen Menus.
Note: The MVP851 must be connected to a MONITOR/TV
either through an A/V Control Center or directly, for
setup and use.
1. Press the Front Panel POWER Switch to ON. The Red
LED above the STANDBY/ON switch lights to indi-
cate the MVP851 is in Standby mode. To Switch ON
the MVP851, press the STANDBY/ON Push-button.
Refer to figure 1.
2. Press the
SETUP Push-
button on the
Remote Control
and the Disc
Setup Menu will
appear on the
Monitor/TV
screen. Refer to
figures 2 & 3.
Note: There are
five Main
Menu Icon
Tabs
located at the Top of the On-Screen Setup Display.
The Icon Tabs are named Disc, Video, Audio, Display
and Others.
3. Access the desired Main Menu Icon Tab by pressing
the Right or Left directional push-buttons on the
supplied Remote Control. Then use the Up
or
Down directional push-buttons followed by the SE-
LECT Push-button for the desired choice.
Note: Some menu choices require more than one step to
complete.
4. The desired Menu Icon will then appear on the MONI-
TOR/TV screen for further action. Follow the instruc-
tions for each of the desired setup menus.
5. After all setup adjustments are complete, press the RE-
TURN Push-button to exit the Setup Mode.
Note: Depending upon what Setup Menu is on the screen,
several presses of the RETURN Push-button may be
required to exit the Setup Mode.
Figure 1
Main Menu Icon Tabs
Figure 3
Figure 2