McIntosh MVP851 - Manual (Page 21)

21
SETUP, con’t
Figure 12
Note: If an undesired number is entered, the CLEAR Push-
button on the Remote Control can be used to remove
it. Each press of the push-button will remove one digit
at a time starting with the digit on the right side.
5. Select the Unlock Player Icon by using the Up or
Down directional Push-buttons followed by the SE-
LECT Push-button. Refer to figure 10.
6. Continue next to Change Password or exit the Setup
Mode by pressing the RETURN Push-button and the
MVP851 will return to normal operation.
Change Password
1. Perform steps 1-4 of “Unlock the Player”.
2. Select the Change Password Icon by using the Up
or
Down directional Push-buttons followed by the SE-
LECT Push-button. Refer to figure 14.
3. Enter the Password into the On-Screen Password Icon
followed by the SELECT Push-button.
4.Continue next to Change Rating Level or exit the Setup
Mode by pressing the RETURN Push-button and the
MVP851 will return to normal operation.
Change Ratings Level
1. Perform steps 1-4 of “Unlock the Player”.
2. Select the Change Level Icon by using the Up
or
Down directional Push-buttons followed by the SE-
LECT Push-button. Refer to figure 14.
3. Using the Up or Down directional Push-buttons
and select the desired Rating Limit followed by the SE-
LECT Push-button. Refer to figure 9.
4.Continue next to Temporary Unlock or exit the Setup
Mode by pressing the RETURN Push-button and the
MVP851 will return to normal operation.
Temporary Unlock
1. Perform steps 1-4 of “Unlock the Player”.
2. Select the Temporary Unlock Icon by using the Up
or Down directional Push-buttons followed by the
SELECT Push-button. The On-Screen Message will
indicate that the current disc in the MVP851 will now
play. Refer to figure 14.
3. Continue next to Video Display Modes or exit the
Setup Mode by pressing the RETURN Push-button and
the MVP851 will return to normal operation.
Figure 14
Figure 13