Metz 36 AF-4 O - Manual (Page 72)

• AF measuring beam control
• Programmed auto flash mode
∆ 1st or 2nd curtain synchronisation
• Wake-up function for flash unit
∆ = Dedicated function is performed by the camera or must be
set on the camera.
x = Some cameras only support the AF illuminator integrated
in the camera.
2.3. mecablitz 36 AF-4 O
• Flash ready indicator in camera viewfinder/camera
display
• Automatic flash sync speed control
• Four Thirds system compatible
• Automatic flash / triggering control
• TTL flash control (TTL with pre-flash function)
• Automatic fill-in flash control
∆ Manual flash exposure correction with TTL
∆ Synchronisation to the 1st or 2nd shutter curtain (2nd
curtain / SLOW2)
x Auto-focus measurement flash control
∆ Pre-flash function for reducing red-eye effect
• Wake-up function for flash unit
∆ = Dedicated function is performed by the camera or must be
set on the camera.
x = Some cameras only support the AF illuminator integrated
in the camera.
2.4 mecablitz 36 AF-4 P
• Flash ready indicator in camera viewfinder/camera
display
• Exposure control indicator in the camera viewfinder with TTL
• Automatic flash sync speed control
• Automatic flash / triggering control
• TTL flash control
• PTTL flash control
72
ķ
707 47 0178.A2 36AF-4-CNOPS 05.06.2008 8:29 Uhr Seite 72