Amplifier cooling system – Meyer Sound JM-1P User Manual
Page 15
JM-1P OPERATING INSTRUCTIONS
15
AMPLIFIER COOLING SYSTEM
The amplifier for JM-1P uses natural convection for cooling
at low to moderate audio levels; for high audio levels, it uses
Meyer Sound’s proprietary QuietCool fan technology to pre-
vent overheating. The QuietCool™ fan only engages at high
audio levels, making it virtually inaudible.
CAUTION:
The heat sink for the JM-1P can
reach temperatures of up to 85° C (185° F) dur-
ing extreme operation. Use extreme caution when
approaching the rear of the loudspeaker.
CAUTION:
To keep the JM-1P from getting too
hot, allow for proper ventilation around the
loudspeaker, especially when it is operated in tightly
packed conditions.
CAUTION:
In the unlikely event that the heat
sink temperature for the JM-1P reaches 95° C
(203° F), the loudspeaker will automatically shut
down until AC power is removed to allow the heat
sink to cool. If after cooling and reapplying AC power
the loudspeaker shuts down again, contact Meyer
Sound for repair information.
QuietCool Fan Technology
!
!
!