Meyer Sound JM-1P - Manual (Page 33)

33
APPENDIX A: OPTIONAL VEAM MULTIPIN CONNECTOR
The JM-1P can be ordered from the factory with a VEAM all-
in-one connector. VEAM connectors consolidate AC power,
audio, and RMS into a single cable, facilitating easy connec-
tions and quick setups.
JM-1P loudspeakers require a grounded outlet. It is very
important that the system be properly grounded in order to
operate safely and properly. Figure 3 illustrates correct wir-
ing for the creation of power cables and distribution systems
for JM-1P loudspeakers equipped with VEAM multipin con-
nectors.
For complete wiring conventions and pin-outs for AC, audio,
and RMS connections, refer to the Meyer Sound document
VEAM Cable Wiring Reference (PN 06.033.113.01).
Meyer Sound offers the VIM-4 VEAM interface module with
four VEAM connectors in the front and a single-phase
IEC 309 32-amp connector in the rear to distribute power,
audio, and RMS to JM-1P loudspeakers equipped with
VEAM connectors.
Figure 3: VEAM Multipin Connector Pin-Outs for Power
Line (brown)
Ground (green/yellow)
Neutral (blue)
VIM-4 Module, Front and Rear Panels