Meyer Sound JM-1P - Manual (Page 37)

JM-1P OPERATING INSTRUCTIONS
37
Installing the Horizontal Rain Hood
To install the JM-1P horizontal rain hood:
1. Attach any required cables to the loudspeaker and orient
it horizontally.
2. Remove the bottom two pan head screws from the
amplifier face.
3. Secure the upper rain hood frame to the amplifier face
with the four 8-32 x .25 flat head screws, two at the top
and two at the bottom.
4. Attach the upper rain hood assembly to the upper rain
hood frame, slipping it under the frame's top flange and
securing it to the bottom of the frame with the two
8-32 x .50 pan head screws.
5. Attach the lower rain hood assembly to the user panel,
slipping it under the flange at the top of the user panel
and securing it to the bottom of the panel with the two
lock pins.
NOTE: The horizontal rain hood should only be
used when the loudspeaker is oriented hori-
zontally (see Figure 5).
NOTE: For permanent, fixed outdoor installa-
tions, both the lower and upper rain hood
assemblies should be installed. For touring applica-
tions, the upper rain hood assembly can be removed,
since the heat sinks and fan and can be safely
exposed to occasional rain. However, for all outdoor
applications, the lower rain hood assembly should
always be installed to shield the unit’s connectors
from rain.
Figure 5: JM-1P Horizontal Rain Hood Installation
Upper rain
hood frame
Lower rain
hood
assembly
Upper rain
hood
assembly Lock
pins (2)
8-32 pan head
screws (2)
8-32 flat head
screws (4)