Milwaukee MK-Manta I - Manual (Page 4)

2
MANTA I Revision 03/05, Effective Date March 2, 2005
3
MANTA I Revision 03/05, Effective Date March 2, 2005
A safety message informs you about potential hazards that could hurt you or
others. Each safety message is preceded by one of the three words: Danger,
Warning, or Caution.
You WILL be KILLED or SERIOUSLY injured if you don’t follow instructions.
You CAN be KILLED or SERIOUSLY injured if you don’t follow instructions.
You CAN be injured if you don’t follow instructions.
Additional information as to the nature of the hazard is provided by the following
hazard symbols, which appear throughout the manual in conjunction with safety
messages.
Never touch electrical wires or
components while the drill is running. They can be sources of electrical shock
which could cause severe injury or burns.
Before performing any maintence or service on this equipment, always turn
the switch off and unplug the drill from the power source to prevent accidental
starting.
Keep hands, feet, hair, and clothing away from all moving parts to prevent injury.
Other important messages that are designed to help prevent damage to your
MK Diamond Manta Core Drill, other property, or the environment, are preceded
by the word notice.
Notice: Your MK-Manta I Core Drill or other property could be damaged if you
don’t follow instructions.
Safety labels contain important safety information. Please read them carefully.
These labels are considered a permanent part of your drill. If a label comes off
or becomes hard to read, contact MK Diamond or your dealer for replacement.
Safety Messages
Hazard Symbols
Damage Prevention
Messages
Safety Labels
( (
)
)
on
( (
)
)
on
Electrical Shock!
( (
)
)
on
Accidental Starts!
( (
)
)
on
Rotating Parts!
DANGER
!
WARNING
!
CAUTION
!