Motorola RDV2080D - Manual (Page 45)

PROG
RAMM
ING
FEAT
URES
English
43
• If you're in ‘Idle’ Programming Mode and wish
to exit the ’Programming Mode’, long press
the PTT button to return to normal radio
operation.
• Whenever the radio wrap around to the
beginning of the Programming Mode options
the changes will be automatically saved, even
if you turn OFF the radio.
• You can exit any Programming Mode without
saving changes (as long as the radio has not
return to the beginning) by turning the radio
OFF.
PROGRAMMING RX (RECEPTION)
FREQUENCIES
Once you have chosen the channel you want to
program, short press the PTT button or MENU
to scroll through the options until you reach
‘Frequency Programming Mode’.
The radio display will show the frequency code
as follows:
To program the desired frequency, scroll up/
down with the
/ buttons until you find the
frequency code value you need. Long press
the PTT button to exit and save, or short press
the PTT button to move to the next
programming feature without saving.
R
X
BRUS_display.book Page 43 Monday, January 16, 2012 5:28 PM