Motorola RDV2080D User Manual
Page 96
94
PL Defeat
Yes
Yes
Yes
Yes
SB1 Button
Also known as ‘Squelch defeat’. Short Press SB1 to
enable PL/DPL defeat so you can listen or monitor
any activity in the channel without noise. Press SB1
again to disable PL/DPL defeat.
Power Select
(4)
No
No
Yes
Yes
High Power
(Model
dependant)
Use CPS for selecting the transmission power level
you want for each channel. Power level default
depends on maximum power the radio supports.
Note: There may be power restrictions depending
on the frequency chosen in each channel.
Power up Text
No
N/A
Yes
N/A
MOTOROLA
Text that shows up in the radio display when turned
ON. Default text is MOTOROLA. Programmable via
CPS.
Repeater/
Talkaround (3)
No
No
Yes
Yes
OFF
Available only for RDU4160d model.
Reset to
Factory
Defaults (2)
Yes
Yes
Yes
Yes
Enabled
Allows to restore radio's factory defaults. Press PTT,
SB1, SB2 simultaneously for 3 seconds while
turning ON radio.
Features
Programmable Via
RADIO PANEL
Programmable via
CPS
Default Value
Programming Tips
Display
Non-
Display
Display
Non-
Display
BRUS_display.book Page 94 Monday, January 16, 2012 5:28 PM