Motorola RDV2080D - Manual (Page 46)

PROG
RAM
M
ING
FEATUR
ES
English
44
PROGRAMMING RX (RECEPTION) CODES
(CTCSS/DPL)
Once you have chosen the channel you want to
program, short press the PTT button or MENU
to scroll through the options until you reach the
‘Code Programming Mode’.
The radio display will show the blinking
CTCSS/DPL code as follows:
To program the desired code, scroll up/down
with the
/ buttons until you get the
CTCSS/DPL code value you want to set up.
Long press the PTT button to exit and save.
PROGRAMMING SCRAMBLE
The scramble feature makes your
transmissions sound garbled to anyone
listening without the same scramble code.
It does not guarantee confidentiality, but it adds
an extra layer of privacy. Scramble default
value is OFF.
Once you have entered ’Programming Mode’
and selected the channel in which you want to
enable Scramble (
), scroll up/down through
the programming options by short pressing the
PTT button, until your radio reaches the
‘Scramble Programming Mode’:
The current scramble setting will blink. You can
select the desired scramble value (0,1,2 or 3)
by pressing the
/ buttons. Long press the
PTT button to exit and save or short press the
R
X
BRUS_display.book Page 44 Monday, January 16, 2012 5:28 PM