Philips Magnavox MRV640 - Manual (Page 10)

Messages on your DVD Recorder display
READING
The following messages may appear on your DVD Recorder display. If you name a disc, the disc
name will appear on the display panel as well.
IS TV ON?
The DVD Recorder is currently in the initial installation mode. Switch
on your TV and read section 'Initial installation' in chapter 'Installing
your DVD recorder.'
NO SIGNAL
No signal or poor signal strength
MENU
The on-screen menu display is on.
OPENING
Disc tray is opening.
TRAY OPEN
Disc tray is open.
CLOSING Disc tray is closing.
READING Disc is being read.
MENU UPDT After a successful recording, the list of disc contents is updated.
INIT MENU After the first recording has been successfully completed on a new disc,
the menu structure is created.
COPY PROT
The DVD/video cassette you are trying to copy is copy protected.
WAIT 000
Please wait until this message disappears. The DVD Recorder is busy
processing another operation.
NO DISC
No disc has been inserted. If a disc has been inserted, then it is possible
that the disc cannot be read.
INFO
Information on the inserted DVD is displayed on the screen.
BUSY
The DVD Recorder is busy making changes DVD-compatible.
ERASING
Entire disc is being erased.
EMPTYDISC Inserted disc is new or has been completely erased (no recordings
present).
PROTECTED Disc cannot be recorded on.
MAX TITLE The maximum number of titles has been reached for the disc. Each disc
can have a maximum of 48 titles.
MAX CHAP
The maximum number of chapters per title/disc has been reached. The
maximum number of chapters per title is 99, and 124 per disc.
DISC FULL
Disc is full. There is no room for new recordings.
PAL DISC
A disc with PAL recordings has been inserted and an attempt was made
to record an NTSC signal. Insert a new disc or use a disc containing
NTSC recordings.
NTSC DISC A disc with NTSC recordings has been inserted and an attempt was
made to record a PAL signal. Insert a new disc or use a disc containing
PAL recordings.