Philips Magnavox MRV640 - Manual (Page 58)

46
Recording without automatic switch off
1 Turn on your TV. Select the channel number for the DVD
Recorder (Audio/Video In or channel 3 or 4).
2 Insert a disc to be used for the recording. '
READING' will appear
on the display.
aIndex display
b A DVD+RW was inserted that already contains recordings. Use
A and B to select a location where the new recording should be
started.
a'EMPTYDISC' appears in the display.
b The inserted disc is empty.
aA dialog box appears asking ifthe contents should be erased
or the disc should be ejected.
b The inserted disc is a DVD+RW whose contents are not compatible
with DVD Video (e.g. a data disc). This disc cannot be used for
recordings
until the entire disc is erased using the
REC/OTR n button.
a'Title limit' appears on the screen when a recording is
attempted.
b A disc can only contain a maximum of 48 titles (including the empty
titles). Erase some titles or change the disc.
Problem
3 If necessary, switch to TV programming by pressing the
MONITOR button on the remote.
4 Use CHANNEL+ or CHANNEL- to select the channel you
want to record. The following will appear on the display at right:
1 FREETITLE P01
Channel number ofthe external inputs:
' EXT2' SVHS jack (Y/C) S-VIDEO (Y/C) Video jack (CVBS) VIDEO
(CVBS) , Audio jack L AUDIO R for SVHS-jack and Video
jack.
Switching between S-VIDEO (Y/C) and VIDEO (CVBS) is
done automatically.
' EXT1' Component Video jacks on the back COMPONENT VIDEO Y
PB PR , Audio jacks L AUDIO R for Component Video
' CAM1' Video/Audio front jacks A/V VIDEO / L AUDIO R
Tip
Recording