Philips Magnavox MRV640 - Manual (Page 32)

20
Connecting a camcorder to the front jacks
The front video and audio in jacks can be used to easily connect a camcorder to the DVD
recorder. These jacks are in the lower right corner of the front panel.
Good Picture Quality
If your camcorder only uses a video output (Composite Video or CVBS), connect the
VIDEO input of the DVD Recorder to the corresponding output jack on the camcorder.
You must also connect the AUDIO left/right in jacks of the DVD Recorder to the audio out
jacks on the camcorder.
Choose '
CAM1' as the DVD Recorder's channel when using these jacks.
Connecting audio devices to analog
audio jacks
There are two analog L AUDIO R OUT jacks (audio output left/right) and two
L AUDIO R (audio input left/right jacks on the back of the DVD Recorder.
These can be used to connect the following devices:
•) A receiver with Dolby Surround Pro Logic
•) A receiver with two channel analog stereo
Can I use the 'Phono input' ofmy amplifier?
This amplifier jack (input) should only be used for record players without
a pre-amplifier. Do not use this input jack to connect the DVD
recorder.
This could damage the DVD Recorder or the amplifier.
?
Connecting additional devices