Mazda 2009 RX-8 - Manual (Page 251)

Black plate (251,1)
(How to clear the message)
l Press any of the following FM/AM,
SAT, CD, MEDIA, CAT, ESN/DISP,
Instant replay, POWER buttons.
l Turn the ACC off or insert a CD.
NOTE
l If an ID code is not input for 10 seconds,
“Err” is displayed and it returns to the
former display.
l Channel preset buttons 1, 2, 3, 4 and the
auto memory button are used for input of
the ID code. Buttons 5 and 6 cannot be
used.
Individual channel locking
If a channel is locked, the channel is
muted.
NOTE
If the registered ID code is forgotten, return
the ID code to the default [0000]. (See
“INTIALIZATION OF ID CODE” section)
(Locking a channel)
1. Select a channel to be locked by
pressing the tune button.Example:
Select channel 100
(Registered ID code input preparation)
2. Hold the auto memory button, then
press channel preset button 6, hold
both buttons together for 1.5 seconds.
3.
“ENTER PIN” appears for 2 seconds
which indicates that it is in code input
mode.
4.
“SR1 - - - -” appears which indicates
that it is ready for code input.
(Registered ID code input)
5. Input the registered ID code using
channel preset buttons 1-4. Example: If
the registered ID code is
“2323”, input
“2323”. At this time “SR1 2323” is
displayed. Press the auto memory
button after the code is input.
(Registered ID code input
determination)
6. Determine the code which has been
input by pressing the auto memory
button briefly.
7. If it does not match the registered code,
“SR1 Err” is displayed and then it
returns to
“SR1 - - - -”.
8. If it matches the registered code,
“SR1 LOCK” appears for 3 seconds
which indicates that the code input has
been completed.
9.
“SR1 LOCK 100” appears which
indicates that the parental lock is
activated. At this time, mute is on and
no sound is heard.
(How to clear the message)
l Press any of the following FM/AM,
SAT, CD, MEDIA, CAT, ESN/DISP,
Instant replay, POWER buttons.
l Turn the ACC off or insert a CD.
NOTE
l If an ID code is not input for 10 seconds,
“Err” is displayed and it returns to the
former display.
l Channel preset buttons 1, 2, 3, 4 and the
auto memory button are used for input of
the ID code. Buttons 5 and 6 cannot be
used.
Lock cancellation
Setting condition: SAT mode
Interior Comfort
Audio System
6-43
RX-8_8Z09-EA-08C_Edition3 Page251
Thursday, July 3 2008 2:23 PM
Form No.8Z09-EA-08C