Mazda 2009 RX-8 - Manual (Page 273)

Black plate (273,1)
22. Say: [Beep]
“1” (Speak a number of
the desired priority from 1 to 7.)
NOTE
l Normally,
“1” is to be input (Highest
priority).
l If more than two mobile telephones are
registered, input the priority order from 1 to
7.
23. Prompt:
“XXXXXX - - - (Ex. “Stan's
phone
”) (Phone tag) set to priority X
(Priority number). Is this correct?
”
24. Say: [Beep]
“Yes”
25. Prompt:
“Pairing complete”
After a mobile telephone is registered, the
system automatically identifies the phone.
By pressing the voice recognition/hands-
free switch again, or by pressing the voice
recognition/hands-free switch first after
turning the ignition switch from the
LOCK to the ACC position, the system
reads out a voice guidance,
“XXXXXX -
- - (Ex.
“Stan's phone”) (Phone tag) is
connected
”. If two or more telephones are
registered, the one with the highest
priority is selected.
qMaking a call using a telephone
number
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
2. Say: [Beep]
“Dial”
3. Prompt:
“Number, please”
4. Say: [Beep]
“XXXXXXXXXXX (Ex.
“555-1234”) (Telephone number)”
5. Prompt:
“Dialing XXXXXXXXXXX
(Ex.
“555-1234”) (Telephone number)
is this correct?
”
6. Say: [Beep]
“Yes” or “No”.
7. When
“Yes” is spoken, the call is
made.
When
“No” is spoken, the procedure
returns to Step 3.
qReceiving an incoming call
1. Prompt:
“Incoming call, press the
phone button to answer
”.
2. To accept the call, press the voice
recognition/hands-free switch with a
short press.
To reject the call, press the voice
recognition/hands-free switch with a
long press.
qHanging up a call
Press the voice recognition/hands-free
switch during the call with a long press.
Beep will confirm that call is ended.
Interior Comfort
Bluetooth Hands-Free
6-65
RX-8_8Z09-EA-08C_Edition3 Page273
Thursday, July 3 2008 2:24 PM
Form No.8Z09-EA-08C