Memorex MX4122 - Manual (Page 9)

8
OPERATING INSTRUCTIONS
With the power off, press the
PROGRAM/CLOCK SET button;
the hours will blink.
1
1
Press the PROGRAM/CLOCK
SET button; the minutes will blink. 1
3
Press the Tune/Skip/Search n 1
or o 2 button to set the current
hour. Be sure to observe the AM or
PM indicators to make sure you
have set the hour correctly.
1 2
2
Press the Tune/Skip/Search n 1
or o 2 button to set the current
minute.
1 2
4
Press the PROGRAM/CLOCK
SET button and the time will be
set.
1
5
SETTING THE CLOCK
With the power on, press the
PRESET EQ button to cycle
through the preset EQ settings or
to turn the EQ off. Each press of
the EQ button will cycle as
follows: CLASSIC, ROCK, POP
or FLAT.
1
1
PRESET EQ
To temporarily mute the sound,
press the MUTE button on the
remote control; the sound will be
muted. Press the MUTE button
again to restore the sound.
While the unit is In the Standby
mode, the backlight will light
dimly. While the unit is on, the
backlight will light brightly.
2
1
MUTE
To listen to the unit through
headphones, simply insert the
headphones (not included) into
the Headphone jack. The
speakers will be disconnected
when the headphones are
plugged in.
1
1
HEADPHONE JACK
BACKLIGHT