MaxTech XT4861 - Manual (Page 7)

6
8514A 1024 x 768 87 Hz 35.52 KHz
Ultra VGA 1024 x 768 60 Hz 48.36 KHz
Front controls Power, Brightness, Contrast, Horizontal-Size, Hori-
zontal-Position, Vertical-Size, Vertical-Position,
Pincushion, Trapezoid
Power saving Display Power Management Signaling (DPMS)
STAND-BY mode
15W (Max.)
OFF mode 3W (Max.)
Plug and Play DDC1, DDC2B
Input voltage 110~240VAC, 50/60 Hz
Operating Temperature 0°~35°C
Environment Humidity 30~80%
Connector 15 Pin D-Sub
Dimensions 13.78 in. W x 14.25 in. H x 14.64 in. D
Specifications subject to change without notice.
Appendix B - Video Cable Pinout
Appendix C - Three Year Warranty
MAXTECH warrants to the original buyer of this product against defects
in material and workmanship for three years from the date of purchase.
Except as specified below, this warranty covers all defects in material or
workmanship in this product. The following are not covered by the
PIN SIGNAL PIN SIGNAL
1 Red 9 No Pin
2 Green 10 Ground
3 Blue 11 Ground
4 No Pin 12 SDA
5 Ground 13 Hor. Synch.
6 Red Return 14 Vert. Synch
7 Green Return 15 Data Clock (SCL)
8 Blue Return
6
1
5
10
11
15
Figure B-1 Pin
Layout and Pin
Assignment Chart