Multiquip CONCRETE SAW FS2 - Manual (Page 7)

MQ-WHITEMAN FS2 CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #2 (11/08/01) — PAGE 7
Accidental Starting
FS2 CONCRETE SAW — SAFETY MESSAGE ALERT SYMBOLS
ALWAYS place ON/OFF switch to OFF,
remove key and/or disconnect the spark
plug lead before servicing the engine or
equipment. Ground the lead to prevent
sparks that could ignite a fire.
Over Speed Conditions
NEVER tamper with the factory settings of the
engine governor or settings. Personal injury
and damage to the engine or equipment can
result if operating in speed ranges above
maximum allowable.
Guards and Covers In Place
NEVER operate the saw without blade guards
and covers in place. Adhere to safety guidelines
ANSI American National Standards Institute,
OSHA or other applicable local regulations.
Respiratory Hazard
ALWAYS wear approved respiratory
protection.
ALWAYS wear approved eye and hearing
protection.
Sight and Hearing hazard
Equipment Damage Messages
Other important messages are provided throughout this manual
to help prevent damage to your concrete saw, other property, or
the surrounding environment.
This concrete saw, other property, or the
surrounding environment could be damaged
if you do not follow instructions.
NOTE