Miele PROFESSIONAL PG 8050I - Manual (Page 65)

Positioning and securing the
machine
To ensure stability for undercounter
installations, the machine must be
aligned and screwed to the counter.
^ Insert the brackets in the slots.
^ Line up the bracket holes with the
long holes in the cover plate. Adjust if
necessary making sure the
dishwasher is centered to the
adjacent cabinetry.
^ Push the dishwasher in the recess.
^ Open the door.
^ Secure the machine with the brackets
to the front edge of the countertop
using the supplied screws.
^ Make sure that the seal on the top
edge of the dishwasher sits flush
against the countertop. Adjust the
feet if necessary.
Do not use silicone sealant to seal
the gaps between the machine and
any neighboring units.
^ When not mounted undercounter,
floor mounting brackets must be
used.
Installation
65