Miele PROFESSIONAL PG 8050I - Manual (Page 38)

Dispensing system settings for
DOS Module G 60 Semi
(optional extras)
It is not possible to change settings
while a program is running. You will
have to cancel the program. The
"Start/Stop" indicator must be
flashing.
To access the DOS programming
level
^ Turn the dishwasher off with the
"On/Off" button.
^ Press and hold the "Extra drying"
and "Start/Stop" buttons, at the same
time, turn the dishwasher on with the
"On/Off" button.
^ Release the buttons.
The "Wash" indicator will come on and
the "Recharge" indicator will flash.
If they do not come on, restart the
procedure.
The set water hardness will appear in
the display.
^ Press the "Extra drying" button once.
The set dispensing time will appear in
the display, e.g.
10 (factory setting).
The "Dry" indicator will come on and the
"Recharge" indicator will flash.
The programming level for the DOS
module has been accessed.
Programming special functions
38