Miele PROFESSIONAL PG 8050I - Manual (Page 59)

Poor cleaning results
Issue Possible fault Solution
The dishes are not
clean. The dishes were not
loaded correctly. Load items so water can
reach all surfaces.
See "Use - Loading the
machine" for more
information.
The outlet of the water
intake pipe for the middle
spray arm was covered.
An insufficient amount of
water reached the middle
spray arm. Make sure that dishes
placed in the rear section
of the upper basket do
not cover the opening.
The program was not
powerful enough. Select a more powerful
program, see the
"Program Guide".
Not enough detergent
was dispensed. Use more detergent, see
"Use - Adding detergent".
Tall items are blocking the
path of the spray arms. Rearrange the items so
that the spray arms can
rotate freely.
The spray arm jets are
blocked. Clean the spray arm jets,
see "Cleaning and Care".
The triple filter in the base
of the wash cabinet is not
clean or is not correctly
fitted.
This may cause the spray
arm jets to get blocked. Clean and/or replace the
triple filter correctly.
Clean the spray arm jets,
see "Cleaning and Care".
The non-return valve is
open and blocked. Soiled
water got back into the
wash cabinet. Clean the drain pump and
the non-return valve, see
"Cleaning the drain pump
and non-return valve".
Frequently asked questions
59