Miele PROFESSIONAL PG 8050I - Manual (Page 64)

Installation options
– Free-standing
– Undercounter
The machine can be installed under a
continuous counter or sink drain. The
recess must be at least 60 cm wide,
60 cm deep and 82 cm high.
Installation
,
Furniture and fittings installed
near the machine must be of a
commercial standard (able to
withstand the effects of steam).
^ Please refer to the installation
diagram supplied with the machine.
Leveling the machine
^ The dishwasher needs to stand even.
It can be leveled with the four height
adjustable feet.
Integrated ("i") professional
dishwashers:
,
To ensure stability, these
dishwashers should only be installed
under a continuous countertop
which must be securely screwed to
adjacent units.
"i" models are designed for installation
under a continuous countertop.
– The accessories are enclosed in a
separate package for on-site
installation.
– The front of the dishwasher is
designed to take a front panel. It can
be fitted with a base unit door front to
match the rest of the kitchen.
– The dishwasher does not have a
toekick. The toekick area of the
dishwasher needs to be covered
either with a toekick board to match
the kitchen cabinets or with one
which can be ordered as a special
accessory. The height of the
dishwasher toekick can be adjusted
to match that of adjacent cabinets.
The toekick recess depth is also
adjustable.
All instructions necessary for installing
the dishwasher are described in
separate installation instructions.
Installation
64