Memorex mt2026D - Manual (Page 18)

4
6
5
Press 5or 6button to select CH NO. item.
Press 6 button to select SKIP item.
Press 3or4 button to select a channel number (for
example, channel 2-2).
Press 3or 4button to set to ON.
Now channel 2-2 will be skipped when
you browse channels by CH+/- button.
To restore a skipped channel, please
use digit buttons to select the skipped
channel, then repeat the above steps
and set the SKIP item to OFF.
Skipping an unnecessary channel
3
16
Checking the DTV signal strength
Viewing channel label (Only for DTV programs)
Tuning in
(continued)
Enter the PRESET menu, press 5or 6 button to select CH
SETUP item.
Press 3 or 4 button to enter CH SETUP menu.
1
2
AUTO PROGRAM
CH SETUP
PRESET
CH NO
SKIP
CH SETUP
2-2
ON
LABEL WGBH-DX
DIG SIGNAL 25DB
Enter the PRESET menu, press 5or
6 button to select CH SETUP item,
press 3 or 4 button to enter CH
SETUP menu. Now the menu bottom
line shows the signal strength for the
current DTV channel.
CH NO
SKIP
CH SETUP
2-2
ON
LABEL WGBH-DX
DIG SIGNAL 25DB
After saving channels into memory, you can skip unnecessary
channels so that only the channels you want to watch are selected
with the CH+/- buttons.
You can check the strength of your DTV signal and determine
whether you need to adjust your antenna or digital cable input. The
stronger the signal strength, the less likely you are to experience
picture degradation.
You can make use of the information banner to know the channel
label for the current DTV program. You can also open the CH
SETUP menu and view the channel label . Note that the channel
labels are automatically assigned and can not be changed by users.
Menu navigation
button
MENU
Exit the menu