Memorex mt2026D - Manual (Page 23)

Auto search/Manual search/Channel skip/Fine tuning
21
Timer Setting
(continued)
On Timer Setup
Setting Sleep timer
You can quickly set the sleep timer by using the SLEEP button on the
remote controller. With every press of this button the sleep time changes
as follows:
For example, you would like the TV to auto
turn off in 60 minutes, you can press the
SLEEP button repeatedly till the screen
displays as the right figure.
To cancel sleep timer, press the SLEEP
button repeatedly till "0 MINUTE"
appears.
0 Minute 240 Minutes 180 Minutes 10 Minutes 5 Minutes
60 MINUTE
- On timer function operates only if current time has been set.
- The TV must be in standby mode for the on timer to work.
- If the TV loses power, the timer setting will be cleared.
3
2
Press VOL+ button to select AM or PM.
Use 0-9 buttons to input the TV ON time, for example,
7:00PM.
In CLOCK menu, highlight ON TIMER item.
1
4
Press button to switch the TV to standby mode. At the
preset time, the TV will turn on automatically.
CLOCK
CLOCK
AUTO CLOCK
ZONE
DST
11:00AM
OFF
OFF
PACIFIC
7:00PM ON TIMER
Menu navigation
button
MENU
0-9
number button
VOL+
Sleep timer
Exit the menu