Timer setting – Memorex MX5520SPKA User Manual

Page 15

Advertising

TIMER SETTING

3. Press the MEMO / C-ADJ button again, minute digit will

flash and press the TUNING DOWN / PREVIOUS or

TUNING UP / NEXT button until the correct minute

digit appears, and then press MEMO / C-ADJ button to

confirm the setting.

TIME OFF SETTING

1. Press the MODE / REMAIN button until the Time OFF

appears.

2. Press the MEMO / C-ADJ button once time,hour digit

will flash and press the TUNING DOWN / PREVIOUS

or TUNING UP / NEXT button until the correct hour

digit appears.

Your system can automatically turn itself off after 10 to 90

minutes. Choosing the period that you wish system to stay

on, and when the SLEEP time arrives, the system will

turn itself off automatically.

1. Turn the system on and press SLEEP button, the

SLEEP indicator will illuminate.

2. Press the SLEEP button continuously to set the sleep

time from 90 to 10.

4. Press the TIMER button until the appears, then

press the POWER button to turn the system to

STANDBY mode.

NOTE: Make sure the is appearing, the system will

automatically turn on/off itself when set time arrive.

SLEEP TIMER