Memorex MX5520SPKA - Manual (Page 9)

7
FUNCTIONAL OVERVIEW
13. SENSOR
Infrared rays sensor, to recieve the informations
transmitted from the remote control.
14. SLEEP
Press to select the SLEEP timer on or off. Keep press-
ing this key will set the sleep time from 00 to 90
minutes.
15. TIMER
Press to set timer on or off. When timer is on, will
illuminate.
16. OPEN / CLOSE
Press to open or close the CD door
17. DISC SKIP
•In CD memory set mode, press to set to next valid
disc number in ascending order.
•In CD normal play or stop mode,press to skip to next
valid disc in ascending order.
•Not in CD mode, press to skip to next valid disc in
ascending order when the door is open.
18. MODE / REMAIN
•In TUNER mode, press to change the following dis-
play cyclically: Band and Frequency, Time display.
•In CD normal play mode, press to change the follow-
ing display cyclically: Each playing time, Each re-
maining time, Total remaining time, Total playing time,
Time display.
• In CD randoml play mode, press to change the follow-
ing display cyclically: Each playing time, Each re-
maining time, Time display.
•In CD memory play mode, press to change the fol-
lowing display cyclically: Each playing time, Each re-
maining time, Program number, Time display.
• In CD stop mode, press to change the following dis-
play cyclically: All time display, Time display.
• In TAPE or AUX mode, press to change the following
display cyclically: AUX or TAPE, Time display.
NOTE: The above Time display including: Clock display,
Time ON, Time OFF.
19. MEMO / C-ADJ.
• In TUNER mode, press to store AM/FM stations in the
memory locations.
• In CD mode, press to do CD program in memory
locations.
• In clock adjust mode, press to set clock or timer
adjustment.
FRONT PANEL
1. POWER
Press the POWER button to switch the main power of
the unit ON or STANDBY.
2. ST. / NOR & MONO. / H.S.D.
•In TAPE RECORD mode, press to select normal mode
or to increase the TAPE recording speed to twice the
normal recording speed.
• In FM mode, press to select either STEREO sound or
MONO sound.
3. VOLUME
Press the volume buttons to adjust the volume level up
or down.
4. PHONES
Plug headphones into this jack. Press the volume button
to adjust the sound level.
5. TUNER / BAND
•Not in TUNER mode, press to set TUNER mode.
• In TUNER mode, press to change the receiving BAND
between FM and AM
6. CD
•Not in CD mode, press to set CD mode.
•In CD mode, it has the same function as the DISC
SKIP key. Press to set or skip to next valid disc in
ascending order.
7. TAPE
Press to select the function of TAPE.
8. PHONO / AUX
Press to select the PHONO function or the AUX input
source. Both of PHONO and AUX are mixing-channel,
you can listen a mixing sound if you play the PHONO
and input other signal from the AUX at the same time.
9. FLAT
Press to select FLAT sound mode.
10. ROCK
Press to select ROCK sound mode.
11. CLASSIC
Press to select CLASSIC sound mode.
12. POP
Press to select POP sound mode.
FRONT PANEL