Programming instructions – Motorola 60C User Manual
Page 150
148
Programming Instructions
Follow this procedure if you need to program your phone’s
phone number or system ID.
Note: Programming is normally done by a trained technician at
the site of purchase. Users should not make changes other than
ones in the following procedure.
Before programming, ask your service provider for your:
• 10-digit MIN (Mobile Identification Number)
• 8- to 15-digit IMSI (International Mobile Service Identifier)
• 8- to 15-digit MDN (Mobile Directory Number)
• 5-digit AMPS SysID number
• 5-digit CDMA SysID number
Do This
To
1
Press
7 4 6 6 3
# M M
(These keys spell P-H-O-N-E
+
# M M
).
open the user activation
menu
2
Press
SELECT
(
+
)
select
NAM1
3
Press the keypad keys for the
10-digit MIN
open the MIN display and
enter the new MIN
4
Press
OK
(
+
)
store the new MIN
5
Similarly, enter appropriate numbers for the IMSI, MDN,
AMPS SysID, and CDMA SysID
6
Press
DONE
(
-
)
close the NAM1 list
7
Press
BACK
(
-
)
close the user activation
menu