Motorola MOTOTRBO XPR 6380 - Manual (Page 17)

Identifying S
tatus Indicators
English
9
Identifying Status Indicators
Your radio indicates its operational status through the following:
LED Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9
Audio Tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10
Indicator Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10
LED Indicator
The LED indicator shows the
operational status of your radio.
Blinking red – Radio is
transmitting at low battery
condition or has failed the self-test
upon powering up.
Solid yellow – Radio is in
Permanent Monitor mode, at a fair
battery condition, monitoring a
channel, or requested trunked call
has no voice channel or target is
busy.
Blinking yellow – Radio is scanning for activity or receiving a
Call Alert.
Solid green – Radio is transmitting or at a good battery
condition.
Blinking green – Radio is powering up, receiving a call or data,
or detecting activity over the air.
NOTE: Upon a PTT button press, if the radio is programmed
for polite operation, the radio automatically determines
whether a transmission is permitted via a Talk Permit
or a Talk Denial tone.
LED Indicator
NAG-LACR.book Page 9 Monday, October 26, 2009 3:03 PM