Motorola MOTOTRBO XPR 6380 - Manual (Page 27)

Advanced Features
English
19
Making a Call Alert with the One Touch Call
Button
Procedure:
1 Press the programmed One Touch Call button to make a
Call Alert to the predefined ID.
2 The LED lights up solid green when your radio is sending
the Call Alert.
3 If the Call Alert acknowledgment is received, two chirps
sound.
OR
If the Call Alert acknowledgment is not received, a low-
pitched tone sounds.
Emergency Operation
NOTE: This is a trunking only feature.
An Emergency feature is used to indicate a critical situation.
You are able to initiate an Emergency at any time, in any state,
even when there is activity on the current channel.
Your radio supports the following Emergency modes:
• Emergency Call
• Emergency Alarm
• Emergency Alarm with Call
• Emergency Alarm with Voice to Follow
In addition, each mode has the following types:
• Regular – Radio transmits an alarm signal and shows audio
and/or visual indicators.
• Silent – Radio transmits an alarm signal without any audio or
visual indicators. There will be no response (call) from the
target radio until you press the PTT button to initiate the call.
• Silent with Voice – Radio transmits an alarm signal and is
able to receive an incoming call, without any audio or visual
indicators, until you press the PTT button to initiate, or
respond to, the call.
Only ONE of the Emergency modes above can be assigned to
the programmed Emergency button.

NAG-LACR.book Page 19 Monday, October 26, 2009 3:03 PM