Musical Fidelity M1CDT - Manual (Page 10)

M1 CDT manual issue 2 Page 10 of 17
PAUSE 1 0:03
STOP 7 41:56
PLAY 1 0:01
STOP. 1 0:00
LOADING AND PLAYING COMPACT DISCS
Switch on unit. To load a CD gently introduce the CD into the slot in the front panel. The mechanism will sense
the presence of the CD and draw it in automatically.
There is no need to use any force, if a CD does not go in, please check there is no CD already in the unit, then
refer to the troubleshooting section P.15.
If a CD is already inside at switch-on, it will be temporarily ejected to 2/3
rd the way out. Change the CD if
required, or wait a few seconds until it is automatically returned into slot.
The unit will scan the contents of the disc. After a short delay, the display window then shows the total number
of tracks available on the CD, and total playing time. In the following example there are 7 tracks, lasting a total
of 41 minutes 56 seconds
PLAY
►|▐▐
If ►|▐▐ button on front panel is pressed, the unit will begin playing from track 1, confirmed by the word PLAY
appearing on the left of the display, with 1 in the centre and elapsed time on the right.
When all tracks on the CD have been played, the display shows STOP and total number of tracks on the disc.
PAUSE
►|▐▐
Pressing the ►|▐▐ button on front panel when disc is playing will halt playback. PAUSE appears in the display
windows instead of PLAY. The disc will continue spinning, but the track does not advance and the CD's output
is muted. Pressing
►|▐▐ again resumes playback from the same place.
PAUSE (Remote control)
On the remote control, PLAY
► and PAUSE ▐▐ buttons have separate functions at each end of the same button.
Pressing ► will only control disc play, and pressing ▐▐ will not resume play.
STOP
█
Playback can be stopped at any time by pressing the █ button on front panel. On the remote control, press
either end of the button, not the middle part.
EJECT ▲
The CD may be removed by pressing the ▲ button on the front panel at any time. The CD will come out of the
slot to approx 2/3rds of the way to allow easy removal.
Note: If the CD is ejected but not removed, it will be retracted back into the mechanism for safety after a few
seconds. After the contents have been scanned, the CD is ready to be played or ejected again.
NO DISC
OPERATION
M1 CDT manual issue 2 Page 11 of 17
STOP. 1
PLAY 17
PLAY 17 0:01
))) ))) 17 0:15
((( 17 0:05
))) 17 0:05
((( ((( 17 0:15
TRACK SELECTION |◄◄ ►►|
To change track, the track skip buttons |◄◄ and ►►| on the front panel can be pressed to jump forwards or
backwards one track in either direction.
Corresponding TRACK buttons on the remote control are marked
|◄◄ and ►►| .
If the unit has stopped playing, a specific track can be accessed directly by pressing either | ◄◄ or ►►| to obtain
the required track number, then pressing ►|▐▐.
TRACK SELECTION BY NUMBER (Remote control)
A specific track can be selected directly by pressing one of the ten track number buttons grouped in the centre-
section of the remote control. The chosen track then plays. To play a track number with two digits, press the
second digit button on the remote control within this delay period, example for track 17:
Press 1:
Press 7:
After a small pause, machine plays selected track:
Note: Track access will be faster on a disk with 9 or less tracks, due to the unit automatically not waiting for a
second button press in the track number.
If a track number is chosen which is not available on the disc, the unit will ignore the entry.
TRACK SEARCH (remote control only)
◄◄ ►►
To play a particular part of a track, a search feature is provided. The search feature may be used to navigate
forwards or backwards to find the required track part. The audio is heard in brief samples to aid searching.
To search for a part ahead of the current track position, press the ►► button. The ► button will cancel and
return to normal playing speed.
To speed up the search, press ►► again. Pressing ►► a third time or ► reverts to normal playing speed.
To search for a part before the current track position, press the
◄◄ button. The ► button will cancel and return
to normal playing speed.
To speed up the search, press ◄◄ again. Pressing ◄◄ a third time or ► reverts to normal playing speed.
OPERATION