Musical Fidelity M1CDT - Manual (Page 9)

M1 CDT manual issue 2 Page 12 of 17
PLAY 1 0:12
repeat track
PLAY 1 0:24
repeat disk
PLAY 1 0:34
repeat a-
PLAY 1 1:55
repeat a-b
PLAY 1 0:34
shuffle once
PLAY 1 0:34
shuffle cont
REPEAT PLAYBACK
The REPEAT button on the remote control allows the repeated playback of either one track or all tracks on the
disc.
By pressing the REPEAT button once, only the current track is repeated, and the display shows
If the REPEAT button is pressed a second time, “repeat disc” is displayed instead, and the entire disc is then
played repeatedly.
Pressing REPEAT a third time cancels repeat mode.
A/B PLAYBACK
“A/B” provides the option of playing just a certain section of the disc over and over again.
Find the beginning of the required section either by listening, or using the display time as a guide.
When the desired starting point is reached, press button A / B on the remote control.
The display will show
When the disc has reached the end of the required section, press the A / B button again, to display
and the unit continuously plays the selected part of the disc in this case, the segment of track 1 from 34
seconds to 1 minute 55 seconds. To cancel A/B repeat mode, press A/B on the remote control.
SHUFFLE PLAYBACK
The SHUFFLE feature allows tracks on the discs to be played in random sequence rather than the normal
consecutive order.
Tracks are also played in a different order each time the disc is restarted, or another disc loaded. This function
is obtained by pressing SHUFFLE on the remote control with the unit either stopped or playing. If the M1CDT is
already playing, play will continue in random order until all tracks on the disc have been played.
Pressing SHUFFLE again will put the M1CDT in continuous Shuffle mode, endlessly repeat the disk with the
tracks in shuffled order
Shuffle play is cancelled by pressing the SHUFFLE button a third time. The unit resumes normal play
function, continuing to the end of the disc in normal order starting from wherever it was left by the previous
random selection.
From pause, pressing
►|▐▐ also continues shuffle play.
OPERATION
M1 CDT manual issue 2 Page 9 of 17
The remote control shown below enables functions from the M1CDT to be operated from a convenient distance.
Equivalent buttons on the remote control have the same functions as those on the front panel of the unit. Other
functions are only available by remote control.
As the handset uses an invisible infra-red light beam, the front edge must be pointed directly towards the
receiver window at the front of the player, without visual obstruction between them.
If the range of the remote control greatly decreases, replace the batteries with new ones. Do not mix old and
new batteries – two are required, size AAA, LR03 or SUM-4.
Please dispose of used batteries in accordance to local regulations.
REMOTE CONTROL HANDSET
Power – CDT on / standby mode
Numeric Keypad
1-9 & 0 for programming tracks
CD navigation section
SEARCH ►► – forward/b through track
TRACK ▐◄◄ backwards one track
SEARCH ◄◄ backwards through track
CD Features section
SCAN – plays first 10 seconds of each
track
REPEAT – repeats whole disk or selected
tracks
CHECK – check pre-programmed tracks
PROGRAM – programs selection and
order of tracks
STOP █ – Stop playing CD
PAUSE PLAY ▐▐ ► – stop/start CD
playback
►►▌ jump to next track
A/B sets repeat start/end to repeat
section of track
SHUFFLE – plays back tracks in
random order
CLEAR – clears selected pre
programmed track
TIME – Changes time played to time
remaining
PAUSE ▐▐ – pause CD playback
PLAY ► - start CD playback