Mercedes-Benz 2003 C-Class - Manual (Page 130)

130
Controls in detail
Control system
After entering the vehicle the steering
wheel and seat will move into the position
stored in memory when
ț the driver’s door is closed
ț you put the key in the starter switch
and
ț press the appropriate stored position
button on the memory switch
(
୴ page 99)
̈ Move the selection marker with
the æ or ç button to the
CONVENIENCE submenu.
̈ Press button j or k repeatedly
until you see this message in the
display:
EASY-ENTRY FEATURE
ACTIVATE .
The selection marker is on the current
setting.
̈ Press æ or ç to change the
easy-entry/exit setting.
The following settings are available for
the easy-entry/exit feature:
i
To cancel seat/steering wheel
movement, do one of the following:
ț press the seat adjustment switch*
(
୴ page 34)
ț move the steering column stalk*
(
୴ page 38)
ț press the memory switch*
(
୴ page 99)
OFF The easy-en-
try/exit feature
is deactivated
STEERING COLUMN Only the steer-
ing column is
moved
STEERING COLUMN +
SEAT Both the
steering column
and the seat are
moved