Mercedes-Benz 2003 C-Class - Manual (Page 294)

294
Practical hints
Replacing bulbs
̈ Twist bayonet socket 5 counterclock-
wise to the stop (do not remove).
̈ Pull the bulb out of the socket.
̈ Insert the new bulb so that the base
locates in the recess in the bayonet
socket 5.
̈ Twist bayonet socket clockwise until
you hear it snap into place.
̈ Plug the connector onto the bulb.
̈ Align headlamp cover 2 and click into
place.
Front turn signal lamp bulb
̈ Switch off the lights.
̈ Open the hood ( ୴ page 235).
̈ Twist bulb socket 1 counterclockwise
and pull out.
̈ Push bulb into socket, turn counter-
clockwise and remove.
̈ Insert new bulb in socket, push in and
twist clockwise.
̈ Reinsert bulb socket in lamp and twist
clockwise.
Parking and standing lamp bulb
̈ Switch off the lights.
̈ Open the hood ( ୴ page 235).
̈ Press the clamp and remove headlamp
cover 2.
̈ Pull out the bulb socket 6 with the
bulb.
̈ Pull the bulb out of the bulb socket.
̈ Insert a new bulb in the socket.
̈ Reinstall the bulb socket.
̈ Align headlamp cover 2 and click into
place.
Side marker lamp bulb
̈ Switch off the lights.
̈ Carefully slide lamp towards rear.
̈ Remove front end first.
̈ Twist bulb socket counterclockwise
and pull out.
̈ Pull bulb out of the bulb socket.
̈ Insert new bulb in socket.
̈ Reinstall bulb socket, push in and twist
clockwise.
̈ To reinstall lamp, set rear end in
bumper and let front end snap into
place.