Configure your basic internet settings, Dhcp configuration, Pppoe – Motorola BR700 User Manual

Page 30

Advertising
background image

INSTALLATION

SECTION 2

SECTION

2,

INSTALLATION

2-17

Configure Your Basic Internet Settings

The following settings illustrate how to configure your router for
accessing the Internet. Detailed descriptions for using the web-based
utility follow this section.

1 Log into the router’s Configuration Utility. You are presented with

the Internet > Basic screen.

2 Starting at the Basic screen, select the Connection Mode your

ISP has indicated you need to use. Based on your connection
type, different areas become inaccessible, leaving you only the
appropriate fields to fill in the necessary information.

DHCP Configuration

The default setting for the router, DHCP is most commonly used for
cable modem connections. There is no configuration necessary for
this setting because the ISP automatically supplies the information.
Your ISP informs you if this is the connection to use.

1 Verify that DHCP is selected.
2 Click Apply to save the setting.

PPPoE

PPPoE (Point-to-Point Protocol over Ethernet) setting is most
commonly used for DSL modem connections. Your ISP informs you if
this is the connection to use.

1 From Connection Mode, select PPPoE.

2 In the PPP User Name field, enter the PPP User Name supplied

by your ISP.

3 In the PPP Password field, enter the PPP Password supplied by

your ISP.

4 Optionally, you might have to enter the PPP Service Name into

this field. Enter the information supplied by your ISP.

5 Click Apply to save the setting, or, if you want to start over, click

Cancel.

Advertising