Motorola WU830G User Manual
Page 24
CONFIGURATION
SECTION 3
WU830G 3-7
3 To ensure that the list is current, click Refresh. The updated list
of access points is displayed.
4 Select the Network Name to which you want to connect.
5 Click Connect. Your WU830G connects to that network.
The following table describes the information provided on the Site
Monitor window:
Column
Heading
Description
Network Name
Displays the name of the access point.
Signal
Displays the signal strength indicated by percent.
Channel
Displays the channel frequency used by the
access point. The possible channels are
1 through 11.
Security
Displays the security type used by the access
point. The possible options are None, WEP,
WPA-PSK, and WPA.
BSS Type
Displays the network type. The possible options
are Infrastructure or Ad-Hoc.
Mode
Displays the wireless mode available with the
access point. Possible modes are G or B.
MAC
Displays the MAC address of the access point.