Motorola WU830G - Manual (Page 25)

SECTION 3 CONFIGURATION
3-8 WU830G
Creating a Network Profile
The Motorola Wireless USB Adapter Configuration Utility enables you
to create profile configurations for different working environments.
This enables you to enter all the configuration information for a
network so you are ready to go as soon as you are in range of that
network. For example, this could be useful if you are going to use a
wireless network at a trade show.
To create a network profile:
1 Right-click the antenna icon in the system tray and select Show
Config Utility. The Motorola Wireless USB Adapter Configuration
Utility window is displayed.
2 Click the Profiles tab. The following window is displayed:
3 In the Profile Name field, select New Entry from drop down box.
The box displays a blinking cursor.
4 Type in a name for the new profile. The “default” profile contains
the initial configuration setting for the WU830G.
5 Enter the Network Name (SSID). This is the service set identifier
that identifies and announces the wireless network to wireless
devices. For more information, refer to the description for Network
Name (SSID) in the table following this procedure.