Motorola WU830G - Manual (Page 37)

SECTION 3 CONFIGURATION
3-20 WU830G
EAP Method
continued EAP-PEAP This method requires a Login
Name and Password.
You must also choose an
additional PEAP Protocol. The
PEAP protocol must match the
one on your target RADIUS
server. The three PEAP
Protocols are:
MD5 Challenge
EAP-GTC
MS CHAP v2
You can also choose to
authenticate the RADIUS server
identity by checking the Validate
Server Certificate check box.
LEAP This is a Cisco based EAP
method. It only requires a Login
Name and Password for user
authentication.
Login Name Required for EAP-TLS, EAP-TTLS, EAP-PEAP,
and LEAP methods.
Certificate Active field for EAP-TLS method.
Password Required for EAP-TTLS, EAP-PEAP, and LEAP
methods.