Philips Magnavox MDV540VR - Manual (Page 23)

Rear Panel 23
DIGITAL
AUDIO OUT
COAXIAL
AUDIO OUT
DVD
L
R
L
R
L
R
S-VIDEO OUT
COMPONENT VIDEO OUT
Y
C B /
P B
AUDIO OUT
DVD/VCR VCR
ANT - IN
ANT-OUT VIDEO OUT
AUDIO IN
VIDEO IN
C R /
P R
DVD COMPONENT VIDEO OUT Jacks
(Y C
B /P B C R /P R ) (green, blue, red)
Connect component video cables (not sup-
plied) here and to the Component Video In
jacks of a TV.This supplies the picture only for
the DVD Player. Details are on page
12.
AC Power Cord
Connect to a standard
AC outlet to supply
power to the DVD/VCR.
DVD S-VIDEO OUT Jack
Connect an S-Video cable (not sup-
plied) here and to a TV’s S-Video In
jack.This supplies the picture only for
the DVD Player. Details are on page
13.
DVD/VCR AUDIO OUT and VIDEO OUT
Jacks (red, white, yellow)
Connect the supplied audio and video cables
here and to a TV’s Audio and Video In jacks.This
supplies sound and picture for both the VCR and
the DVD Player. Details are on page
11.
DVD AUDIO OUT jacks
Left (white), Right (red)
Connect the supplied audio cables
here and to the Audio In jacks of a
TV or Stereo.These jacks only sup-
ply audio for the DVD Player. Use
these if you want a secondary con-
nection between the DVD Player
and another TV, etc.
DVD COAXIAL DIGITAL
AUDIO OUT Jack (black)
Connect a coaxial digital audio cable
(not supplied) here and to a Stereo’s
Coaxial Digital Audio In jack.This
supplies audio only for the DVD
Player. Details are on page
15.
ANT-IN
(Antenna In) jack
Connect your anten-
na or Cable TV signal
here. Details are on
pages 8-
15.
ANT-OUT
(Antenna Out) Jack
Use the supplied RF coaxial
cable to connect this jack to
the ANTENNA IN jack on
your TV, Cable Box, or
Satellite Receiver. Details are
on pages 8-
10.
VCR AUDIO IN and VIDEO IN jacks
(red, white, yellow)
Connect audio and video cables from a camcorder,
VCR, etc., here. Details are on page 35. This will be
useful if you want to copy a videotape or watch
material that is playing on other equipment.
• The DVD S-VIDEO OUT, DVD
COMPONENT VIDEO OUT, DVD AUDIO
OUT and DVD COAXIAL DIGITAL AUDIO
OUT jacks are only useful in DVD mode.To
have sound and picture in VCR mode, you
must connect either the RF coaxial cable or
the audio/video cables supplied, using the
DVD/VCR AUDIO OUT and VIDEO OUT
jacks. Details are on pages eight and
11.
Helpful Hint
H9660UD_1.qx4 04.4.14 4:47 PM Page 23