Philips Magnavox MDV540VR - Manual (Page 38)

38 Timer Recording (cont’d)
Cancelling Timer Recordings
1 Press VCR, then press DISC/MENU so MENU
appears.
2 Press o or p to select TIMER PROGRAMMING,
then press B.
3 Press o or p to find the program you want to
cancel.
4 While the program number is flashing, press s
to clear all the information for that program.
5 Press C-RESET/CLEAR to remove the menu.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 05/04 TUE
START TIME 07:30 PM
END TIME 08:30 PM
CHANNEL 16
REC SPEED SP
9 Press o or p to select a recording tape speed.
The arrow will appear beside your choice.The select-
ed speed will flash beside REC SPEED. Details about
tape speed are on page 72.
10 Press C-RESET/CLEAR to store the timer record-
ing.
11 Press TIMER SET. The DVD/VCR will turn off and
will appear on the display panel. In some cases, the
DVD/VCR will switch to DVD mode instead.You may
use the DVD Player during a timer recording.
If you want to use the VCR until time for the record-
ing, don’t press TIMER SET until a few minutes before
the recording should start. Or, press TIMER SET only
when you know you won’t be using the VCR anymore
(until after the recording).When
is in the display
panel, you cannot put the DVD/VCR in VCR mode by
pressing VCR or SOURCE.You must first press TIMER
SET to cancel the timer recording temporarily.Then,
you can use the VCR features again.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 0 5 / 0 4 TUE
START TIME 0 7 : 3 0 P M
END TIME 0 8 : 3 0 P M
CHANNEL 1 6
REC SPEED S P
B SP
SLP
Helpful Hints
TIMER SET
SETUP SUBTITLE AUDIO
MODE
DISPLAY
TITLE
PREV/
CH
NEXT/
CH
RETURN
A-B
DVD
PLAY STOP
SEARCH
FF
PAUSE
SPEED NA508
SEARCH
REW
VCR
DISC
REPEAT
C-RESET
CLEAR
REC REPEAT
ANGLE
STANDBY-ON
2 3 1
SLOW
5 6 4
8 9 7
SEARCH MODE ZOOM
0 +10
MENU OK
9
11
10
• To change incorrect information,
press s or B to choose the item
you want to change. Press o or
p
to adjust the information.
• If a timer recording is set and
appears, pressing STOP/EJECT
C
A (VCR) will turn on the
DVD/VCR and/or cancel the timer
recording.The will
disappear.
Press STOP/EJECT C A (VCR)
again to remove the tape. Insert a
tape and press TIMER SET to
reset the timer recording.
• If there is no tape in the VCR
when you press TIMER SET,
will flash. Insert a tape.
H9660UD_1.qx4 04.4.14 4:47 PM Page 38