Micro Star Computer MS- 9130 v1.x - Manual (Page 19)

2-6
MS-9130 Workstation Mainboard
The mainboard provides four slots for 184-pin DDR SDRAM DIMM
(Double In-Line Memory Module) modules and supports up to 4GB memory
size. You can install PC2700/DDR333, PC2100/DDR266, or PC1600/DDR200
modules on the DDR DIMM slots (DDR 1~4).
Memory
DDR DIMM Slots
(DDR1~4)
Installing DDR Modules
1. The DDR DIMM has only one
notch on the center of module. The
module will only fit in the right
orientation.
2. Insert the DIMM memory module
vertically into the DIMM slot. Then
push it in until the golden finger
on the memory module is deeply
inserted in the socket.
3. The plastic clip at each side of the
DIMM slot will automatically
close.
Volt Notch