Micro Star Computer MS- 9130 v1.x - Manual (Page 55)

3-19
BIOS Setup
VGA, LPT & COM, HDD & FDD, PCI Master
These fields specify whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected.
PowerOn by PCI Card
When it is set to Enabled, the feature allows your system to be powered
on by the PCI card. Setting options: Enabled, Disabled.
Modem Ring Resume
When it is set to Enabled, the feature allows your system to support
COM port Modem to resume. Setting options: Enabled, Disabled.
RTC Alarm Resume
When it is set to Enabled, your can set the date and time at which the RTC
(real-time clock) alarm awakens the system from Suspend mode.
Date (of Month)
The field specifies the date for Resume By RTC Alarm. Settings: 0~31.
Resume Time (hh:mm:ss)
The field specifies the time for Resume By RTC Alarm. Format is <hour>
<minute><second>.
IRQs Activity Monitoring
Press <Enter> and the following sub-menu appears:
MSI Reminds You...
If you have changed this setting, you must let the system boot up
until it enters the operating system, before this function will work.