Mio A701 - Manual (Page 45)

45
Tip: If you wish to see the track log currently being recorded, tap on it twice to make
it visible.
In this screen you have the following options:
• Record: this will initiate track log recording. A new line appears in the list, and
GPS position data will be saved until you stop the recording or exit MioMap. A red
icon (Page 28) is shown on the map screens to let you know that a recording is in
progress. Tapping that icon opens this Track Log screen.
• Stop recording: if recording is in progress, this buttons stops it.
• Info: this button opens a screen that shows the track log details, and lets you:
• change the name of the track log (Rename button),
• change the colour of the track log (Colour on the map selector),
• have it displayed on the map (Fit to screen button),
• Replay: push this button to see a simulation of the saved track log on the map. A
green icon (Page 28) will appear on the map screens to let you know it is not a fly
over but a simulation based on a real saved log.
• Delete: you can delete a track log if it is not needed any more. MioMap will ask
you to confirm this action.
• Track log options: this button in the upper right corner leads to a settings screen
where you can set up the track logging parameters:
• Update interval is how often track points will be saved. Position information is
normally received once a second from the GPS. If you do not need such a
detailed log, you can increase this number to save track log space.
• Current autosave track size: this figure shows how much memory is used by
the automatically saved track logs.
• Enable auto-saving: when auto-saving is enabled, you do not need to turn
track log saving on and off manually. MioMap will automatically start recording
the track log as soon as GPS position is available.
• Limit track DB size: here you can set whether or not to maximise the size of
the database where the automatically saved track logs are kept.