Mio A701 - Manual (Page 79)

79
6.5.1 Cockpit settings
These settings determine how MioMap displays different content elements of the
Cockpit screen.
6.5.1.1 3D in Cockpit mode (and track-up orientation)
The normal use of the Cockpit mode is cruising or navigating, when the road lying in
front of the driver is the most important part of the map. It is usually done in a 3D
view with the current direction towards the top of the map. By default MioMap uses
the same look of the map in both Map and Cockpit modes.
Use this switch to instruct MioMap to always open the Cockpit mode in 3D with
Track-up orientation (automatic map rotation) for driving purposes.
Note: You will still have the possibility to switch the map to 2D view or north-up
orientation, but the map will return to 3D mode with map rotation whenever Cockpit
mode is started.
6.5.1.2 Cockpit screen layout
There are three route data fields on the left of the Cockpit screen.
Their content is fixed in Cruise mode (when there is no active route), but for
Navigation mode you can change their content here. The available values are listed
here: Page 31.
6.5.2 Backlight settings
Here you can set how the display backlight behaves when using MioMap. These
settings are independent of the settings of the other applications of Mio DigiWalker
A701.