Exclude selected station, Show excluded stations, Sorts events by distance / type – Mio A701 User Manual
Page 56: Use traffic information, Recalculate to avoid traffic, 2 exclude, Selected station, 3 show, Excluded stations, 4 sorts
56
If there aren’t any radio stations broadcasting TMC data in your area, the receiver
keeps on searching. You will see the frequency continuously sweeping across the
FM CCIR radio band (87.5-108 MHz). When you move to an area with TMC
information, the indicator will show the frequency, and detailed information for the
TMC station.
4.7.2.2 Exclude selected station
If you wish to receive TMC data from another radio station, push this button. The
radio station will be added to the list of excluded stations, MioMap will start searching
for another TMC station, and will always skip the excluded station in the future.
4.7.2.3 Show excluded stations
This button opens the list of excluded radio stations. Tap any of the stations in the
list, then tap Enable to allow MioMap to accept TMC information from this station.
4.7.2.4 Sorts events by distance / type
The list of traffic events can be ordered by their distance from the current position, or
by their type. Tap this button to toggle between the two possibilities.
4.7.2.5 Use traffic information
This button is enabled by default, which means that TMC messages are used in
route planning. Tap this button to have MioMap ignore real-time traffic information
when planning routes.
Tip: If you make a route planning for a future journey, it may be better to turn off
TMC corrected route planning.
4.7.2.6 Recalculate to avoid traffic
This setting is similar to the previous one. Disabling it will not prevent the system
from using TMC data for route planning, but will not trigger an automatic
recalculation when the traffic conditions change during your journey.