Motorola 9500 - Manual (Page 115)

Using Calling Features 111
+ Showing Signal Strength
Satellite
Mode Use this feature to check the strength of the signal
that your phone is receiving from the Iridium satellite
network. If you are in cellular mode the signal
strength is displayed automatically if you are
registered.
1. Follow the steps in “1-2: Getting to Call
Related Features...” to get to Show Signal
Strength .
2. Press
O
to select. You will see:
If the antenna is not rotated, you will see
Rotate Antenna . Rotate the antenna to
continue.
After a few seconds, if the phone is able to
locate a signal, the signal strength indicator
appears in the upper left corner of the
display.
rx
The signal strength meter remains on the
display for several seconds. If the phone
cannot locate a signal, you will see
Weak
Signal .
3. Press and hold
C
to exit the menu.
Cellular
Mode This feature is only available from satellite mode.
12:00
Checking
Signal ...